dmesg - Intel Core i7-4510U
Linux version 4.10.13-1-ARCH (builduser@tobias) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP PREEMPT Thu Apr 27 12:15:09 CEST 2017
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000094d5ffff] usable
BIOS-e820: [mem 0x0000000094d60000-0x0000000095d5ffff] reserved
BIOS-e820: [mem 0x0000000095d60000-0x000000009aabefff] usable
BIOS-e820: [mem 0x000000009aabf000-0x000000009aebefff] reserved
BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Dell Inc. Inspiron 5547/0K5C1C, BIOS A05 08/12/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F80000000 write-back
1 base 0080000000 mask 7FE0000000 write-back
2 base 009B000000 mask 7FFF000000 uncachable
3 base 009C000000 mask 7FFC000000 uncachable
4 base 00FFC00000 mask 7FFFC00000 write-protect
5 base 0100000000 mask 7F00000000 write-back
6 base 0200000000 mask 7E00000000 write-back
7 base 0400000000 mask 7F80000000 write-back
8 base 045F600000 mask 7FFFE00000 uncachable
9 base 045F800000 mask 7FFF800000 uncachable
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
BRK [0x01d5f000, 0x01d5ffff] PGTABLE
BRK [0x01d60000, 0x01d60fff] PGTABLE
BRK [0x01d61000, 0x01d61fff] PGTABLE
BRK [0x01d62000, 0x01d62fff] PGTABLE
BRK [0x01d63000, 0x01d63fff] PGTABLE
BRK [0x01d64000, 0x01d64fff] PGTABLE
RAMDISK: [mem 0x36918000-0x37483fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL )
ACPI: XSDT 0x000000009AFFE210 0000BC (v01 DELL CL09 00000001 01000013)
ACPI: FACP 0x000000009AFF7000 00010C (v05 DELL CL09 00000001 ASL 00040000)
ACPI: DSDT 0x000000009AFE5000 00E029 (v01 DELL CL09 00000000 ASL 00040000)
ACPI: FACS 0x000000009AFB8000 000040
ACPI: SLIC 0x000000009AFFD000 000176 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: UEFI 0x000000009AFFC000 000236 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: FPDT 0x000000009AFFA000 000044 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: MSDM 0x000000009AFF9000 000055 (v03 DELL CL09 00000001 ASL 00040000)
ACPI: ASF! 0x000000009AFF8000 0000A5 (v32 DELL CL09 00000001 ASL 00040000)
ACPI: HPET 0x000000009AFF6000 000038 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: APIC 0x000000009AFF5000 00008C (v03 DELL CL09 00000001 ASL 00040000)
ACPI: MCFG 0x000000009AFF4000 00003C (v01 DELL CL09 00000001 ASL 00040000)
ACPI: SSDT 0x000000009AFE4000 0006FE (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
ACPI: BOOT 0x000000009AFE2000 000028 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: LPIT 0x000000009AFE1000 000094 (v01 DELL CL09 00000000 ASL 00040000)
ACPI: ASPT 0x000000009AFDF000 000034 (v07 DELL CL09 00000001 ASL 00040000)
ACPI: DBGP 0x000000009AFDE000 000034 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: SSDT 0x000000009AFD8000 000539 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
ACPI: SSDT 0x000000009AFD7000 000AD8 (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
ACPI: SSDT 0x000000009AFD3000 00355E (v01 COMPAL CRV ORB 00003000 ACPI 00040000)
ACPI: SSDT 0x000000009AFCF000 002250 (v01 COMPAL CRV ORB 00001000 ACPI 00040000)
ACPI: CSRT 0x000000009AFD2000 0000C4 (v01 DELL CL09 00000001 ASL 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
NODE_DATA(0) allocated [mem 0x45f5f8000-0x45f5fcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000045f5fffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009cfff]
node 0: [mem 0x0000000000100000-0x0000000094d5ffff]
node 0: [mem 0x0000000095d60000-0x000000009aabefff]
node 0: [mem 0x000000009afff000-0x000000009affffff]
node 0: [mem 0x0000000100000000-0x000000045f5fffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000045f5fffff]
On node 0 totalpages: 4165724
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3996 pages, LIFO batch:0
DMA32 zone: 9771 pages used for memmap
DMA32 zone: 625344 pages, LIFO batch:31
Normal zone: 55256 pages used for memmap
Normal zone: 3536384 pages, LIFO batch:31
Reserving Intel graphics memory at 0x000000009ba00000-0x000000009f9fffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x94d60000-0x95d5ffff]
PM: Registered nosave memory: [mem 0x9aabf000-0x9aebefff]
PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 35 pages/cpu @ffff88045f200000 s103768 r8192 d31400 u262144
pcpu-alloc: s103768 r8192 d31400 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4100612
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16308088K/16662896K available (6363K kernel code, 1090K rwdata, 1984K rodata, 1292K init, 1032K bss, 354808K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Preemptible hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:8448 nr_irqs:760 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2594.240 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.66 BogoMIPS (lpj=8647466)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 6 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 24K
ftrace: allocating 25119 entries in 99 pages
smpboot: Max logical packages: 4
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz (family: 0x6, model: 0x45, stepping: 0x1)
Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (20768.41 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:03:10, date: 05/07/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
Simple Boot Flag at 0x44 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88044CA1C000 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88044C9E7000 0005AA (v01 PmRef ApIst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88044C9D3C00 000119 (v01 PmRef ApCst 00003000 INTL 20130117)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [AMD3] (on)
ACPI: Power Resource [AMD2] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xb0400000-0xb07fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xb0c10000-0xb0c13fff 64bit]
pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xb0c00000-0xb0c0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xb0c18000-0xb0c1801f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xb0c14000-0xb0c17fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xb0c1c000-0xb0c1c3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:1f.2: reg 0x24: [mem 0xb0c1b000-0xb0c1b7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xb0c19000-0xb0c190ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f]
pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [io 0x4000-0x40ff]
pci 0000:01:00.0: reg 0x18: [mem 0xb0b00000-0xb0b00fff 64bit]
pci 0000:01:00.0: reg 0x20: [mem 0xb0800000-0xb0803fff 64bit pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xb0b00000-0xb0bfffff]
pci 0000:00:1c.0: bridge window [mem 0xb0800000-0xb08fffff 64bit pref]
pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xb0a00000-0xb0a7ffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xb0a00000-0xb0afffff]
pci 0000:03:00.0: [1002:6900] type 00 class 0x038000
pci 0000:03:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xb0000000-0xb01fffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [io 0x3000-0x30ff]
pci 0000:03:00.0: reg 0x24: [mem 0xb0900000-0xb093ffff]
pci 0000:03:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xb0900000-0xb09fffff]
pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x94d60000-0x97ffffff]
e820: reserve RAM buffer [mem 0x9aabf000-0x9bffffff]
e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0xfd60-0xfd63] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x1800-0x18fe] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x1854-0x1857] has been reserved
system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:04: Plug and Play ACPI device, IDs DLL063f PNP0f13 (active)
system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:05: [mem 0xff000000-0xff000fff] has been reserved
system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:05: [mem 0x9fa21000-0x9fa21fff] has been reserved
system 00:05: [mem 0x9fa10000-0x9fa1ffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xb0c1f000-0xb0c1ffff] has been reserved
system 00:06: [mem 0xb0c1d000-0xb0c1dfff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
pci 0000:03:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xb0b00000-0xb0bfffff]
pci 0000:00:1c.0: bridge window [mem 0xb0800000-0xb08fffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0xb0a80000-0xb0a8ffff pref]
pci 0000:00:1c.3: PCI bridge to [bus 02]
pci 0000:00:1c.3: bridge window [mem 0xb0a00000-0xb0afffff]
pci 0000:03:00.0: BAR 6: assigned [mem 0xb0940000-0xb095ffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xb0900000-0xb09fffff]
pci 0000:00:1c.4: bridge window [mem 0xa0000000-0xb01fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:01: resource 1 [mem 0xb0b00000-0xb0bfffff]
pci_bus 0000:01: resource 2 [mem 0xb0800000-0xb08fffff 64bit pref]
pci_bus 0000:02: resource 1 [mem 0xb0a00000-0xb0afffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xb0900000-0xb09fffff]
pci_bus 0000:03: resource 2 [mem 0xa0000000-0xb01fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 11696K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x96abf000-0x9aabf000] (64MB) mapped at [ffff880096abf000-ffff88009aabefff]
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
workingset: timestamp_bits=40 max_order=22 bucket_order=0
zbud: loaded
Key type asymmetric registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: Signaling PME with IRQ 40
pcieport 0000:00:1c.3: Signaling PME with IRQ 41
pcieport 0000:00:1c.4: Signaling PME with IRQ 42
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90002000000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x45
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
microcode: sig=0x40651, pf=0x40, revision=0x1c
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
Magic number: 1:92:72
rtc_cmos 00:01: setting system clock to 2017-05-07 10:03:11 UTC (1494151391)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1292K
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1812K
Freeing unused kernel memory: 64K
random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
[drm] Initialized
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
[drm] amdgpu kernel modesetting enabled.
vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle
ATPX version 1, functions 0x00000033
ATPX Hybrid Graphics
checking generic (c0000000 7f0000) vs hw (a0000000 10000000)
amdgpu 0000:03:00.0: enabling device (0006 -> 0007)
[drm] initializing kernel modesetting (TOPAZ 0x1002:0x6900 0x1028:0x0640 0x00).
[drm] register mmio base: 0xB0900000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xB0000000
[drm] doorbell mmio size: 2097152
[drm] probing gen 2 caps for device 8086:9c18 = 5323c42/0
[drm] probing mlw for device 8086:9c18 = 5323c42
ATOM BIOS: Dell
[drm] GPU post is not needed
[drm] Changing default dispclk from 0Mhz to 600Mhz
amdgpu 0000:03:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
amdgpu 0000:03:00.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 64bits DDR3
[TTM] Zone kernel: Available graphics memory: 8161488 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 2048M of VRAM memory ready
[drm] amdgpu: 2048M of GTT memory ready.
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
amdgpu 0000:03:00.0: amdgpu: using MSI.
[drm] amdgpu: irq initialized.
amdgpu: powerplay initialized
amdgpu 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000080000010, cpu addr 0xffff880449aee010
amdgpu 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000080000020, cpu addr 0xffff880449aee020
amdgpu 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000080000030, cpu addr 0xffff880449aee030
amdgpu 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000080000040, cpu addr 0xffff880449aee040
amdgpu 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000080000050, cpu addr 0xffff880449aee050
amdgpu 0000:03:00.0: fence driver on ring 5 use gpu addr 0x0000000080000060, cpu addr 0xffff880449aee060
amdgpu 0000:03:00.0: fence driver on ring 6 use gpu addr 0x0000000080000070, cpu addr 0xffff880449aee070
amdgpu 0000:03:00.0: fence driver on ring 7 use gpu addr 0x0000000080000080, cpu addr 0xffff880449aee080
amdgpu 0000:03:00.0: fence driver on ring 8 use gpu addr 0x0000000080000090, cpu addr 0xffff880449aee090
amdgpu 0000:03:00.0: fence driver on ring 9 use gpu addr 0x00000000800000a0, cpu addr 0xffff880449aee0a0
amdgpu 0000:03:00.0: fence driver on ring 10 use gpu addr 0x00000000800000b0, cpu addr 0xffff880449aee0b0
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 17 usecs
[drm] ring test on 1 succeeded in 20 usecs
[drm] ring test on 2 succeeded in 22 usecs
[drm] ring test on 3 succeeded in 10 usecs
[drm] ring test on 4 succeeded in 11 usecs
[drm] ring test on 5 succeeded in 11 usecs
[drm] ring test on 6 succeeded in 10 usecs
[drm] ring test on 7 succeeded in 10 usecs
[drm] ring test on 8 succeeded in 11 usecs
[drm] ring test on 9 succeeded in 6 usecs
[drm] ring test on 10 succeeded in 8 usecs
[drm] ib test on ring 0 succeeded
[drm] ib test on ring 1 succeeded
[drm] ib test on ring 2 succeeded
[drm] ib test on ring 3 succeeded
[drm] ib test on ring 4 succeeded
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] ib test on ring 8 succeeded
[drm] ib test on ring 9 succeeded
[drm] ib test on ring 10 succeeded
[drm] Initialized amdgpu 3.9.0 20150101 for 0000:03:00.0 on minor 0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
SCSI subsystem initialized
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 9 ports detected
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ahci 0000:00:1f.2: version 3.0
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo only pio slum part deso sadm sds apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m2048@0xb0c1b000 port 0xb0c1b100 irq 45
ata2: DUMMY
ata3: DUMMY
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xb0c1c000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 3-1: new high-speed USB device number 2 using ehci-pci
ata1.00: ATA-9: ST1000LM014-1EJ164, DEMA, max UDMA/133
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 DEMA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2593.996 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2564143601c, max_idle_ns: 440795231101 ns
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 8 ports detected
random: fast init done
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
usb 3-1.3: new full-speed USB device number 3 using ehci-pci
usb 3-1.5: new full-speed USB device number 4 using ehci-pci
ip_tables: (C) 2000-2006 Netfilter Core Team
systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
usb 3-1.6: new full-speed USB device number 5 using ehci-pci
usb 3-1.7: new high-speed USB device number 6 using ehci-pci
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
EXT4-fs (sda3): re-mounted. Opts: data=ordered
usb 3-1.8: new high-speed USB device number 7 using ehci-pci
clocksource: Switched to clocksource tsc
media: Linux media interface: v0.10
usbcore: registered new interface driver rtsx_usb
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:28b0)
uvcvideo 3-1.8:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 3-1.8:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 3-1.8:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 3-1.8:1.0: Entity type for entity Camera 1 was not initialized!
input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.8/3-1.8:1.0/input/input2
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
ACPI: AC Adapter [ACAD] (on-line)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
hidraw: raw HID events driver (C) Jiri Kosina
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:01:00.0 eth0: RTL8106e at 0xffffc90001a16000, ec:f4:bb:f9:88:50, XID 04900000 IRQ 48
wmi: Mapper loaded
input: PC Speaker as /devices/platform/pcspkr/input/input7
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
systemd-journald[196]: Received request to flush runtime journal from PID 1
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
ath: phy0: WB335 2-ANT card detected
ath: phy0: Set BT/WLAN RX diversity capability
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3234: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x19
snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x1a
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x43
ath: EEPROM regdomain: 0x6c
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6c
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
[drm] Memory usable by graphics device = 2048M
checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90003300000, irq=19
vga_switcheroo: enabled
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input11
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 1
fbcon: inteldrmfb (fb0) is primary device
[Firmware Bug]: battery: (dis)charge rate invalid.
ACPI: Battery Slot [BAT1] (battery present)
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver btusb
usbcore: registered new interface driver ath3k
Adding 1048572k swap on /dev/sda6. Priority:-1 extents:1 across:1048572k FS
r8169 0000:01:00.0 enp1s0: renamed from eth0
hid-rmi 0018:06CB:2934.0001: Scanning PDT...
hid-rmi 0018:06CB:2934.0001: Found F34 on page 0x00
hid-rmi 0018:06CB:2934.0001: Found F01 on page 0x00
fuse init (API version 7.26)
hid-rmi 0018:06CB:2934.0001: Found F11 on page 0x00
iTCO_vendor_support: vendor-support=0
hid-rmi 0018:06CB:2934.0001: Found F54 on page 0x01
dell_wmi: Detected Dell WMI interface version 0
input: Dell WMI hotkeys as /devices/virtual/input/input13
hid-rmi 0018:06CB:2934.0001: Found F30 on page 0x01
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
hid-rmi 0018:06CB:2934.0001: Found F55 on page 0x02
hid-rmi 0018:06CB:2934.0001: rmi_scan_pdt: Done with PDT scan.
ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
hid-rmi 0018:06CB:2934.0001: rmi_populate_f11: size in mm: 102 x 77
hid-rmi 0018:06CB:2934.0001: firmware id: 1541093
input: DLL063E:00 06CB:2934 as /devices/pci0000:00/INT33C3:00/i2c-1/i2c-DLL063E:00/0018:06CB:2934.0001/input/input12
hid-rmi 0018:06CB:2934.0001: input,hidraw0: I2C HID v1.00 Pointer [DLL063E:00 06CB:2934] on i2c-DLL063E:00
input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:045E:07FD.0002/input/input14
usb 3-1.5: USB disconnect, device number 4
input: ELAN Touchscreen as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.6/3-1.6:1.0/0003:04F3:034F.0005/input/input15
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
intel_rapl: RAPL package 0 domain package locked by BIOS
hid-generic 0003:045E:07FD.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:1d.0-1.3/input0
mousedev: PS/2 mouse device common for all mice
hid-multitouch 0003:04F3:034F.0005: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:1d.0-1.6/input0
input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.1/0003:045E:07FD.0003/input/input19
hid-generic 0003:045E:07FD.0003: input,hiddev0,hidraw3: USB HID v1.11 Device [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:1d.0-1.3/input1
input: Microsoft Microsoft Nano Transceiver 1.1 as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.3/3-1.3:1.2/0003:045E:07FD.0004/input/input20
hid-generic 0003:045E:07FD.0004: input,hidraw4: USB HID v1.11 Mouse [Microsoft Microsoft Nano Transceiver 1.1] on usb-0000:00:1d.0-1.3/input2
usb 3-1.5: new full-speed USB device number 8 using ehci-pci
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: data=ordered
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
random: crng init done
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
r8169 0000:01:00.0 enp1s0: link down
IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with e8:94:f6:ad:2f:d4
wlp2s0: send auth to e8:94:f6:ad:2f:d4 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e8:94:f6:ad:2f:d4 (try 1/3)
wlp2s0: RX AssocResp from e8:94:f6:ad:2f:d4 (capab=0x431 status=0 aid=3)
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: associated
usb 3-1.5: device descriptor read/64, error -110
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 11 usecs
[drm] ring test on 1 succeeded in 18 usecs
[drm] ring test on 2 succeeded in 16 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 4 succeeded in 5 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 5 usecs
[drm] ring test on 7 succeeded in 6 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
wlp2s0: authenticate with e8:94:f6:ad:2f:d4
wlp2s0: send auth to e8:94:f6:ad:2f:d4 (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with e8:94:f6:ad:2f:d4 (try 1/3)
wlp2s0: RX AssocResp from e8:94:f6:ad:2f:d4 (capab=0x431 status=0 aid=3)
wlp2s0: associated
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 11 usecs
[drm] ring test on 1 succeeded in 18 usecs
[drm] ring test on 2 succeeded in 16 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 6 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 6 usecs
[drm] ring test on 7 succeeded in 5 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 10 usecs
[drm] ring test on 1 succeeded in 18 usecs
[drm] ring test on 2 succeeded in 16 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 6 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 6 usecs
[drm] ring test on 7 succeeded in 6 usecs
[drm] ring test on 8 succeeded in 5 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 11 usecs
[drm] ring test on 1 succeeded in 18 usecs
[drm] ring test on 2 succeeded in 12 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 6 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 5 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 11 usecs
[drm] ring test on 1 succeeded in 17 usecs
[drm] ring test on 2 succeeded in 15 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 6 usecs
[drm] ring test on 5 succeeded in 5 usecs
[drm] ring test on 6 succeeded in 6 usecs
[drm] ring test on 7 succeeded in 5 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 11 usecs
[drm] ring test on 1 succeeded in 18 usecs
[drm] ring test on 2 succeeded in 16 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 6 usecs
[drm] ring test on 5 succeeded in 5 usecs
[drm] ring test on 6 succeeded in 6 usecs
[drm] ring test on 7 succeeded in 5 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 10 usecs
[drm] ring test on 1 succeeded in 17 usecs
[drm] ring test on 2 succeeded in 15 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 5 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 5 usecs
[drm] ring test on 7 succeeded in 6 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 10 usecs
[drm] ring test on 1 succeeded in 17 usecs
[drm] ring test on 2 succeeded in 15 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 5 usecs
[drm] ring test on 5 succeeded in 5 usecs
[drm] ring test on 6 succeeded in 6 usecs
[drm] ring test on 7 succeeded in 5 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 11 usecs
[drm] ring test on 1 succeeded in 18 usecs
[drm] ring test on 2 succeeded in 15 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 5 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 5 usecs
[drm] ring test on 7 succeeded in 6 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 10 usecs
[drm] ring test on 1 succeeded in 18 usecs
[drm] ring test on 2 succeeded in 15 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 6 usecs
[drm] ring test on 5 succeeded in 5 usecs
[drm] ring test on 6 succeeded in 6 usecs
[drm] ring test on 7 succeeded in 5 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 10 usecs
[drm] ring test on 1 succeeded in 17 usecs
[drm] ring test on 2 succeeded in 15 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 5 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 5 usecs
[drm] ring test on 7 succeeded in 6 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 10 usecs
[drm] ring test on 1 succeeded in 18 usecs
[drm] ring test on 2 succeeded in 15 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 5 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 6 usecs
[drm] ring test on 7 succeeded in 5 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 10 usecs
[drm] ring test on 1 succeeded in 19 usecs
[drm] ring test on 2 succeeded in 15 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 5 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 5 usecs
[drm] ring test on 7 succeeded in 6 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 6 usecs
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 10 usecs
[drm] ring test on 1 succeeded in 18 usecs
[drm] ring test on 2 succeeded in 15 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 5 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 5 usecs
[drm] ring test on 7 succeeded in 5 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 10 usecs
[drm] ring test on 1 succeeded in 17 usecs
[drm] ring test on 2 succeeded in 15 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 5 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 5 usecs
[drm] ring test on 7 succeeded in 6 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 11 usecs
[drm] ring test on 1 succeeded in 18 usecs
[drm] ring test on 2 succeeded in 15 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 6 usecs
[drm] ring test on 5 succeeded in 5 usecs
[drm] ring test on 6 succeeded in 6 usecs
[drm] ring test on 7 succeeded in 5 usecs
[drm] ring test on 8 succeeded in 6 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
wlp2s0: AP e8:94:f6:ad:2f:d4 changed bandwidth, new config is 2412 MHz, width 2 (2422/0 MHz)
VI should always have 2 performance levels
failed to send message 18a ret is 255
failed to send pre message 145 ret is 255
failed to send message 146 ret is 0
failed to send pre message 148 ret is 0
amdgpu 0000:03:00.0: GPU pci config reset
[drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
can't get the mac of 5
[ powerplay ] VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!
[drm] ring test on 0 succeeded in 10 usecs
[drm] ring test on 1 succeeded in 17 usecs
[drm] ring test on 2 succeeded in 15 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 6 usecs
[drm] ring test on 5 succeeded in 6 usecs
[drm] ring test on 6 succeeded in 5 usecs
[drm] ring test on 7 succeeded in 6 usecs
[drm] ring test on 8 succeeded in 5 usecs
[drm] ring test on 9 succeeded in 4 usecs
[drm] ring test on 10 succeeded in 5 usecs